Large‐Area Alignment of Tungsten Oxide Nanowires over Flat and Patterned Substrates for Room‐Temperature Gas Sensing

Alignment of nanowires over a large area of flat and patterned substrates is a prerequisite to use their collective properties in devices such as gas sensors. In this work, uniform single‐crystalline ultrathin W₁₈O₄₉ nanowires with diameters less than 2 nm and aspect ratios larger than 100 have been synthesized, and, despite their flexibility, assembled into thin films with high orientational order over a macroscopic area by the Langmuir–Blodgett technique. Alignment of the tungsten oxide nanowires was also possible on top of sensor substrates equipped with electrodes. Such sensor devices were found to exhibit outstanding sensitivity to H₂ at room temperature.     

Compositions of the seed oil of the Borago officinalis from Iran

In order to investigate the composition of borage (Borago officinalis L.) seed oil, this research was performed under the field conditions at Shahriyar and Garmsar zones, Iran during the 2012 planting year. The oil yield of borage was 31.46% and 33.7% at Shahriyar and Garmsar zone, respectively, and nine and eight fatty acids were identified in the seed oil of borage at Shahriyar and Garmsar, respectively – palmitic, linoleic, stearic and γ-linolenic acids were dominant in the seed oil of borage from both zones. Unsaturated fatty acid content was more than the saturated fatty acids in both zones. The ratio of linoleic acid and α-linolenic acid in the borage cultivated at Shahriyar and Garmsar zones was 2.13 and 2.29. The fatty acid profile of Garmsar borage, oleic and oleic/linoleic acid ratio, increased. Locations with different ecological conditions resulted in changes in both seed oil content and fatty acid profile of borage.     

Effects of Solvent and Reaction Time in Sonochemical Synthesis of Cadmium(II) Compounds and Use them as Template for Synthesis of Cadmium(II) Oxide Nano Structures

Abstract . A cadmium(II) zero-dimensional supramolecular compound [Cd(L)₂(I)₂] ( 1 ), {L = 2-picolylamine}, was fabricated by branch tube and sonochemical irradiation techniques. Regardless of the method utilized, the same crystallographic structure is obtained for the complex. To investigate the effects of reaction time and solvent on the creation of [Cd(L)₂(I)₂] ( 1 ) supramolecule compound, certain tests were designed and four specimens of 1 were fabricated through sonochemical process. Less reaction time led to the creation of smaller particles with mixed morphologies. To prepare cadmium(II) oxide micro-crystals via calcination, four samples were utilized as new precursors. Micro- and nano-sphere of cadmium(II) oxide could be fabricated from 1. The morphology and structure of micro- and nano-crystals were identified by using Scanning Electron Microscopy (SEM), IR spectroscopy, and X-ray powder diffraction (XRD).     

Investigation of a Biosensor Based on Phenylalanine Dehydrogenase Immobilized on a Polymer‐Blend Film for Phenylketonuria Diagnosis

We investigated a L ‐phenylalanine (L ‐phe) biosensor, functionalized through enzyme immobilization on a polymer‐blend film. The electron mediator 3,4‐dihydroxybenzaldehyde (3,4‐DHB) was employed at the electrode surface to improve direct oxidation of NADH to NAD⁺ and no additional reagents is required to be added to the sample solution. The bioactivated electrode was coated with a semi‐permeable cellulose acetate membrane in order to prevent dissolution of biofunctionalized polymer‐blend film. This constructed enzyme electrode is the first selective biosensor for phenylketonuria (PKU) detection. The sensitivity of the enzyme electrode was determined as 12.014 mA/M cm². The Michaelis–Menten and current responses as well as sensitivity of the electrode showed improved values than those of previous works. This selective biosensor presented an excellent electroanalytical response for L ‐phe, with a high steady‐state current being obtained after 20 s. The sensitivity of our biodevice is quite sufficient for the purpose of PKU detection because the reference range of clinical concern for L ‐phenylalanine concentration is C_{L ‐phe}>0.5 mM. This surface‐bioactivated enzyme electrode retained more than 80 % of its electrocatalytic activity after 16 days.     

Oxidation of CO by NO on planar and faceted Ir(210)

Oxidation of CO by pre-adsorbed NO has been studied on planar Ir(210) and nanofaceted Ir(210) with average facet sizes of 5 nm and 14 nm by temperature programmed desorption (TPD). Both surfaces favor oxidation of CO to CO(2), which is accompanied by simultaneous reduction of NO with high selectivity to N(2). At low NO pre-coverage, the temperature (T(i)) for the onset of CO(2) desorption as well as CO(2) desorption peak temperature (T(p)) decreases with increasing CO exposure, and NO dissociation is affected by co-adsorbed CO. At high NO pre-coverage, T(i) and T(p) are independent of CO exposure, and co-adsorbed CO has no influence on dissociation of NO. Moreover, at low NO pre-coverage, planar Ir(210) is more active than faceted Ir(210) for oxidation of CO to CO(2): T(i) and T(p) are much lower on planar Ir(210) than that on faceted Ir(210). In addition, faceted Ir(210) with an average facet size of 5 nm is more active for oxidation of CO to CO(2) than faceted Ir(210) with an average facet size of 14 nm, i.e., oxidation of CO by pre-adsorbed NO on faceted Ir(210) exhibits size effects on the nanometer scale. In comparison, at low O pre-coverage planar Ir(210) is more active than faceted Ir(210) for oxidation of CO to CO(2) but no evidence has been found for size effects in oxidation of CO by pre-adsorbed oxygen on faceted Ir(210) for average facet sizes of 5 nm and 14 nm. The TPD data indicate the same reaction pathway for CO(2) formation from CO + NO and CO + O reactions on planar Ir(210). The adsorption sites of CO, NO, O, CO + O, and CO + NO on Ir are characterized by density functional theory.     

Revisiting the foundations of the quantum theory of atoms in molecules: Toward a rigorous definition of topological atoms

An explicit classification of consistent variational constraints within the context of the “quantum theory of proper open subsystems” as well as the “quantum theory of atoms in molecules” (QTAIM) it presented. It is demonstrated that the general variational procedure is not sensitive enough to discriminate between different mathematically consistent variational conditions. The uniqueness of the regional kinetic energy is employed to derive the net zero‐flux condition and the regions satisfying this condition are named as quantum divided basins. A modified form of the local zero‐flux is proposed in order to define topological atoms within the context of the orthodox QTAIM. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Load Balancing in Hypergraphs

Consider a simple locally finite hypergraph on a countable vertex set, where each edge represents one unit of load which should be distributed among the vertices defining the edge. An allocation of load is called balanced if load cannot be moved from a vertex to another that is carrying less load. We analyze the properties of balanced allocations of load. We extend the concept of balancedness from finite hypergraphs to their local weak limits in the sense of Benjamini and Schramm (Electron J Probab 6(23):13, 2001) and Aldous and Steele (in: Probability on discrete structures. Springer, Berlin, pp 1–72, 2004). To do this, we define a notion of unimodularity for hypergraphs which could be considered an extension of unimodularity in graphs. We give a variational formula for the balanced load distribution and, in particular, we characterize it in the special case of unimodular hypergraph Galton–Watson processes. Moreover, we prove the convergence of the maximum load under some conditions. Our work is an extension to hypergraphs of Anantharam and Salez (Ann Appl Probab 26(1):305–327, 2016), which considered load balancing in graphs, and is aimed at more comprehensively resolving conjectures of Hajek (IEEE Trans Inf Theory 36(6):1398–1414, 1990).     

Biomacromolecule template‐based molecularly imprinted polymers with an emphasis on their synthesis strategies: a review

Molecular imprinting is an efficient tool for generating synthetic acceptors with specific recognition sites, which are mimed from template structures via polymerization. The final products of this strategy lead to high‐performance polymers with active recognition sites for a range of various applications in terms of extraction and separation, characterization and recognition, biomedicine, biosensors, and drug delivery. Molecular imprinting of biomacromolecules synthesizes a series of matrices that may be referred to as biomolecularly imprinted polymers (BMIPs). In this review article, an overview of different methods for fabricating BMIPs with an emphasis on novel polymerization schemes along with potential challenges is discussed. Additionally, selected applications of BMIPs will be briefly highlighted derived from the latest research papers. Copyright © 2016 John Wiley & Sons, Ltd.     

Betti base‐modified magnetic nanoparticles as a novel basic nanocatalyst in Knoevenagel condensation and its related palladium nanocatalyst in Suzuki coupling reactions

Betti base‐modified Fe₃O₄ nanoparticles have been successfully designed and synthesized for the first time through the condensation of Fe₃O₄ magnetic nanoparticles coated by (3‐aminopropyl)triethoxysilane with β‐naphthol and benzaldehyde. Their application as a novel magnetic nanocatalyst in the Knoevenagel condensation and also application to immobilization of palladium nanoparticles for Suzuki coupling reactions have been investigated which opens a new field for application of Betti base derivatives in organic transformations. The synthesized inorganic–organic hybrid nanocatalyst has been fully been characterized using Fourier transform infrared, X‐ray diffraction, vibrating sample magnetometry, transmission and scanning electron microscopies, energy‐dispersive X‐ray, wavelength‐dispersive X‐ray and X‐ray photoelectron spectroscopies and inductively coupled plasma techniques. The catalyst was easily separated with the assistance of an external magnet from the reaction mixture and reused for several consecutive runs with no significant loss of its catalytic efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

Experimental examination of the cooling performance of a cylindrical microchannel heat sink with straight and sinusoidal fins and alumina nanofluid coolant

Journal of Thermal Analysis and Calorimetry - Miniaturization of the electronic devices and dissipation of the heat generated during the operations within such equipment are of the most important...